{"title":"Rotary Hammers \u0026 Breakers","description":"\u003cp\u003eRotary hammers and breakers work concrete and masonry by combining rotation with a piston-driven blow, so the bit chips material away rather than relying on the operator to push. Hammer drills sit at the light end — a drill that adds percussion for anchors and small holes in block and brick, and reverts to ordinary drilling when the material changes. SDS Plus rotary hammers cover most anchor setting and through-drilling up to around 1-1\/8\", with a chuck that locks the bit while letting it move under the blow. SDS Max takes over for larger diameters, core drilling and sustained chipping, where the heavier blow and the bigger shank are what stop the tool shaking itself apart. Breakers drop rotation entirely and deliver a straight demolition blow for slab and footing work. Dust matters as much as the hole: models with an integrated extractor or a shroud capture silica at the point of drilling instead of putting it in the air. Every one of these depends on the steel in the end, so pair the tool with the chisels and bits in Drill \u0026amp; Hammer Accessories.\u003c\/p\u003e","products":[{"product_id":"milwaukee-m18-fuel-1-1-8-sds-plus-rotary-hammer-w-one-key-2915-22de","title":"Milwaukee M18 FUEL 1-1\/8\" SDS Plus Rotary Hammer w\/ ONE-KEY \u0026 HAMMERVAC Dust Extractor Kit (2915-22DE)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1-1\/8\" SDS Plus rotary hammer with ONE-KEY and HAMMERVAC dust extractor kit (2915-22DE); the hammer produces 3.6 ft-lbs impact energy at 800 RPM and 4,600 BPM from a POWERSTATE brushless motor\u003c\/li\u003e\n\u003cli\u003eHAMMERVAC 1-1\/8\" dedicated dust extractor (2915-DE) captures holes up to 1-1\/8\" in diameter and 8\" deep, with a HEPA filter rated to trap 99.97% of particles larger than 0.3 microns and AUTOPULSE filter cleaning\u003c\/li\u003e\n\u003cli\u003eKit contents: hammer (2915-20), extractor (2915-DE), two M18 REDLITHIUM HIGH OUTPUT XC6.0 battery packs (48-11-1865), M18 and M12 Rapid Charger (48-59-1808) and a carrying case\u003c\/li\u003e\n\u003cli\u003e3-mode operation with AUTOSTOP Kickback Control, AVS Anti-Vibration System, REDLINK PLUS Intelligence and ONE-KEY tracking\u003c\/li\u003e\n\u003cli\u003eOSHA Table 1 compliant for respirable crystalline silica; up to 50 holes of 5\/8\" x 3\" per charge; 5-year tool warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMatched hammer and shroud reach the full 1-1\/8\" by 8\" hole without the fitment guesswork of a universal dust cup\u003c\/li\u003e\n\u003cli\u003eTable 1 compliance out of the box removes the need for separate air monitoring on drilling tasks\u003c\/li\u003e\n\u003cli\u003eTwo XC6.0 packs plus the rapid charger keep one battery cutting while the other charges, so anchor installs do not pause\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP and AVS reduce injury risk and fatigue on the larger-diameter holes where this class of hammer bites hardest\u003c\/li\u003e\n\u003cli\u003eONE-KEY records and locates a high-value kit, which matters when it moves between crews\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":54935970578798,"sku":"USM2915-22DE","price":898.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/d77a505c08e64ad598cce5a464f243be.webp?v=1789414829"},{"product_id":"milwaukee-m18-fuel-1-sds-plus-rotary-hammer-2912-20","title":"Milwaukee M18 FUEL 1\" SDS Plus Rotary Hammer (2912-20)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1\" SDS Plus Rotary Hammer (2912-20) delivering 2 ft-lbs of impact energy at 4,800 BPM and 1,330 RPM\u003c\/li\u003e\n\u003cli\u003eSDS Plus chuck with 1\" bit capacity and 3-mode selection: rotary hammer, hammer only and rotary only\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP kickback control that electronically senses a tool bind-up and shuts the tool off\u003c\/li\u003e\n\u003cli\u003ePOWERSTATE brushless motor with REDLINK PLUS intelligence and an AVS anti-vibration system\u003c\/li\u003e\n\u003cli\u003eTool only; drills up to 125 3\/8\" x 2\" holes per charge with an M18 REDLITHIUM HIGH OUTPUT XC6.0 battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 ft-lbs at 4,800 BPM sets anchors in concrete at a pace that keeps an installation crew moving\u003c\/li\u003e\n\u003cli\u003eRotary-only mode means the same tool drills wood and metal, so it replaces a second drill in the bag\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP shuts down on a rebar strike before the hammer can wrench your wrist\u003c\/li\u003e\n\u003cli\u003eThe AVS anti-vibration system keeps hand-arm exposure down through a day of repetitive anchor holes\u003c\/li\u003e\n\u003cli\u003e125 holes per charge on an XC6.0 pack covers most overhead hanger and strut layouts without a cord\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016278655342,"sku":"USM2912-20","price":378.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/a443a8909a3949cd9ef2cc8a7cfb686e.webp?v=1789414832"},{"product_id":"milwaukee-1-2-hammer-drill-5376-20","title":"Milwaukee 1\/2\" Hammer Drill (5376-20)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMilwaukee 5376-20 corded 1\/2\" hammer drill with a heavy-duty metal chuck\u003c\/li\u003e\n\u003cli\u003e8 amp motor rated 0-2,800 RPM and 0-48,000 BPM\u003c\/li\u003e\n\u003cli\u003eTwo-mode operation for hammer drilling and drill-only work in concrete, wood and metal\u003c\/li\u003e\n\u003cli\u003eCompact 11.5\" profile with an all-metal gear case\u003c\/li\u003e\n\u003cli\u003eIncludes a 360-degree locking side handle with depth gauge\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo modes let one tool drill anchors in concrete and then switch to drilling wood or steel\u003c\/li\u003e\n\u003cli\u003eThe 11.5\" profile gets between studs and into panel work a longer hammer drill will not clear\u003c\/li\u003e\n\u003cli\u003eAll-metal gear case is rated 2X more durable than the leading competitor, which matters on a daily-use drill\u003c\/li\u003e\n\u003cli\u003eThe 360-degree side handle can be set on either side, and the depth gauge repeats hole depth for anchors\u003c\/li\u003e\n\u003cli\u003eOver-mold grip increases hold and reduces vibration during extended hammer drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016279048558,"sku":"USM5376-20","price":102.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/6bc3d213e608411cbc656015895041a8.gif?v=1789414829"},{"product_id":"milwaukee-29-1-2-max-lok-sds-max-adapter-48-20-6962","title":"Milwaukee 29-1\/2\" Max-Lok SDS MAX Adapter (48-20-6962)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e29-1\/2\" MAX-Lok SDS Max adapter 48-20-6962, part of the MAX-LOK system (48-20-6950)\u003c\/li\u003e\n\u003cli\u003eSDS Max extension that is compatible with any rotary hammer\u003c\/li\u003e\n\u003cli\u003eSliding sleeves provide twist-and-lock connection security\u003c\/li\u003e\n\u003cli\u003eExtends total drilling length to 82-1\/2\" when paired with shorter bits\u003c\/li\u003e\n\u003cli\u003eBuilt so existing short bits do the drilling instead of dedicated long bits\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReach 82-1\/2\" deep without owning a rack of extra-long, expensive bits.\u003c\/li\u003e\n\u003cli\u003eTwist-and-lock sleeves keep the joint from backing off under hammer action.\u003c\/li\u003e\n\u003cli\u003eCompatibility with any rotary hammer means it is not tied to one brand of drill.\u003c\/li\u003e\n\u003cli\u003eShort bits plus one adapter is a far cheaper way to buy depth capability.\u003c\/li\u003e\n\u003cli\u003eBecause the length comes from the adapter, you can pull it off and drill tight spaces with the bare bit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016279933294,"sku":"USM48-20-6962","price":45.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/fa81e9eb82f941749348a6517bfa2f35.gif?v=1789414830"},{"product_id":"milwaukee-m18-fuel-1-1-8-sds-plus-rotary-hammer-w-one-key-2915-20","title":"Milwaukee M18 FUEL 1-1\/8\" SDS Plus Rotary Hammer w\/ ONE-KEY (2915-20)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1-1\/8\" SDS Plus rotary hammer (2915-20) with a POWERSTATE brushless motor delivering 3.6 ft-lbs of impact energy, 800 RPM and 4,600 BPM\u003c\/li\u003e\n\u003cli\u003eSDS Plus bit interface with 3-mode operation: rotary hammer, hammer only and rotary only\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP Kickback Control, AVS Anti-Vibration System and REDLINK PLUS Intelligence\u003c\/li\u003e\n\u003cli\u003eONE-KEY technology for tool tracking, security lockout and inventory management\u003c\/li\u003e\n\u003cli\u003eSold as a bare tool and compatible with the M18 HAMMERVAC 1-1\/8\" dedicated dust extractor (2915-DE); 5-year tool warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3.6 ft-lbs of impact energy handles larger anchors and through-holes that stall a 1\" class hammer\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP cuts power on over-rotation, protecting the operator when a bit catches steel\u003c\/li\u003e\n\u003cli\u003eAVS keeps hand-arm vibration down through repeated overhead drilling sessions\u003c\/li\u003e\n\u003cli\u003eONE-KEY lets a shop lock and locate the tool, reducing loss on multi-crew jobsites\u003c\/li\u003e\n\u003cli\u003eBare-tool purchase adds capacity to an existing M18 fleet without paying for duplicate batteries\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016280457582,"sku":"USM2915-20","price":448.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/938c9c71033843a0914ba3db1001cb59.webp?v=1789414832"},{"product_id":"milwaukee-m18-fuel-1-2-hammer-drill-driver-2904-20","title":"Milwaukee M18 FUEL 1\/2\" Hammer Drill\/Driver (2904-20)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1\/2\" Hammer Drill\/Driver (2904-20) delivering 1,400 in-lbs of torque at 2,100 RPM from a POWERSTATE brushless motor\u003c\/li\u003e\n\u003cli\u003e1\/2\" all-metal ratcheting chuck with carbide teeth for bit retention\u003c\/li\u003e\n\u003cli\u003eOnly 6.9\" in length for access in tight spaces\u003c\/li\u003e\n\u003cli\u003eAuto-Stop control mode with a dedicated Auto-Stop indicator light, plus a mechanical clutch for fastening control and a dedicated hammer drill mode for masonry\u003c\/li\u003e\n\u003cli\u003eBare tool including a side handle and an all-metal belt clip, with an LED work light and REDLINK PLUS intelligence; runs on M18 REDLITHIUM packs including the XC5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1,400 in-lbs turns large hole saws and selfeed bits that stop a lighter drill, without stepping up to a right-angle tool\u003c\/li\u003e\n\u003cli\u003eAt 6.9\" long it gets between studs and inside cabinets where a longer drill will not fit square to the work\u003c\/li\u003e\n\u003cli\u003eAuto-Stop with an indicator light cuts power on a bind-up before the drill twists out of your hands\u003c\/li\u003e\n\u003cli\u003eA mechanical clutch keeps repeated fastening consistent instead of driving screws to different depths\u003c\/li\u003e\n\u003cli\u003eHammer mode means the same drill sets anchors in block and concrete without a second tool in the bag\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016281112942,"sku":"USM2904-20","price":229.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/92189d4f48274ce79371584b87e05759.webp?v=1789414832"},{"product_id":"milwaukee-sds-plus-bull-point-chisel-10-48-62-6110","title":"Milwaukee SDS PLUS Bull Point Chisel 10\" (48-62-6110)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSDS PLUS bull point chisel, catalog number 48-62-6110, with a 10\" overall length\u003c\/li\u003e\n\u003cli\u003eSDS PLUS shank for SDS PLUS rotary and demolition hammers\u003c\/li\u003e\n\u003cli\u003eForged from high grade steel\u003c\/li\u003e\n\u003cli\u003eStarts holes in concrete slabs and handles general chipping and breaking\u003c\/li\u003e\n\u003cli\u003eSold as (1) bull point chisel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA bull point focuses hammer energy on a single spot to break through concrete and start an opening\u003c\/li\u003e\n\u003cli\u003e10\" is long enough to clear slab thickness while staying stiff and controllable\u003c\/li\u003e\n\u003cli\u003eThe SDS PLUS shank fits the rotary hammer most crews already carry -- no larger breaker needed\u003c\/li\u003e\n\u003cli\u003eForged high grade steel holds its point under repeated hammer-only cycles\u003c\/li\u003e\n\u003cli\u003eOne steel handles both hole starting and general chipping, cutting what you have to carry\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016280981870,"sku":"USM48-62-6110","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/980dc54cd440418ebde17d2cfcef2fa7.gif?v=1789414830"},{"product_id":"milwaukee-1-3-4-sds-max-rotary-hammer-5546-21","title":"Milwaukee 1-3\/4\" SDS MAX Rotary Hammer (5546-21)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMilwaukee 5546-21 corded 1-3\/4\" SDS Max rotary hammer\u003c\/li\u003e\n\u003cli\u003e15 amp motor delivering 380 RPM and 2,900 BPM\u003c\/li\u003e\n\u003cli\u003e8.1 ft-lbs of impact energy at a 21.25 lb tool weight\u003c\/li\u003e\n\u003cli\u003eTwo-mode operation for rotary hammer and hammer only, with a variable speed dial and lock-on button\u003c\/li\u003e\n\u003cli\u003eIncludes a side handle and grease tube\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8.1 ft-lbs of impact energy handles larger-diameter anchor and through-holes a 1-9\/16\" hammer struggles with\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP E-Clutch cuts the tool when the bit binds, which protects your wrists on rebar strikes\u003c\/li\u003e\n\u003cli\u003eBuilt-in advanced anti-vibration system with a rated 10 m\/s2 vibration level keeps hand-arm exposure down on long runs\u003c\/li\u003e\n\u003cli\u003eVariable speed dial lets you start a hole slowly and then run at full speed once the bit bites\u003c\/li\u003e\n\u003cli\u003eLock-on button removes trigger fatigue during extended chipping in hammer-only mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016281669998,"sku":"USM5546-21","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/194f2f88bc51496b9f50679fe641b697.webp?v=1789414830"},{"product_id":"milwaukee-m18-fuel-1-sds-plus-rotary-hammer-kit-2912-22","title":"Milwaukee M18 FUEL 1\" SDS Plus Rotary Hammer Kit (2912-22)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1\" SDS Plus Rotary Hammer Kit (2912-22) delivering 2 ft-lbs of impact energy at 4,800 BPM and 1,330 RPM\u003c\/li\u003e\n\u003cli\u003eSDS Plus chuck with 1\" bit capacity and 3-mode operation: rotary hammer, hammer only and rotary only\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP kickback control that electronically senses a bind-up and shuts the tool off\u003c\/li\u003e\n\u003cli\u003ePOWERSTATE brushless motor with REDLINK PLUS intelligence and an AVS anti-vibration system; up to 125 3\/8\" x 2\" holes per charge\u003c\/li\u003e\n\u003cli\u003eKit includes the 2912-20 hammer, two M18 REDLITHIUM HIGH OUTPUT XC6.0 battery packs (48-11-1865) and an M18 \u0026amp; M12 rapid charger (48-59-1808); 5 year tool warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 ft-lbs at 4,800 BPM drills anchor holes fast enough to keep a hanger or strut layout on schedule\u003c\/li\u003e\n\u003cli\u003eRotary-only mode lets the same tool drill wood and steel, cutting one tool out of what you carry up\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP cuts power on a rebar hit before the tool can twist out of your hands overhead\u003c\/li\u003e\n\u003cli\u003eAVS anti-vibration keeps hand-arm exposure manageable across a full day of repetitive holes\u003c\/li\u003e\n\u003cli\u003eTwo XC6.0 packs on a rapid charger mean drilling continues while the spare recharges\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016281932142,"sku":"USM2912-22","price":698.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/caecb69cae984e2d8fc989a6bedee69f.webp?v=1789414829"},{"product_id":"milwaukee-m18-fuel-1-2-hammer-drill-driver-kit-2904-22","title":"Milwaukee M18 FUEL 1\/2\" Hammer Drill\/Driver Kit (2904-22)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1\/2\" Hammer Drill\/Driver Kit (2904-22) delivering 1,400 in-lbs of torque from a POWERSTATE brushless motor with two speeds\u003c\/li\u003e\n\u003cli\u003e1\/2\" all-metal chuck with carbide teeth, and only 6.9\" in length for access into tight spaces\u003c\/li\u003e\n\u003cli\u003eAuto-Stop control mode for enhanced safety, mechanical clutch for fastener consistency and an LED work light\u003c\/li\u003e\n\u003cli\u003eRuns on the M18 REDLITHIUM XC5.0 platform\u003c\/li\u003e\n\u003cli\u003eKit includes the hammer drill\/driver, two M18 REDLITHIUM XC5.0 battery packs, M18 \u0026amp; M12 multi-voltage charger, side handle and a blow molded case; 5 year tool and 3 year battery warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1,400 in-lbs handles hole saws, selfeed bits and lag work that stalls a general-purpose drill\u003c\/li\u003e\n\u003cli\u003eA 6.9\" head length gets the chuck square to the work between joists and inside boxes, reducing wrist strain\u003c\/li\u003e\n\u003cli\u003eAuto-Stop cuts the motor on a bind before the tool can twist, which matters most with large-diameter bits\u003c\/li\u003e\n\u003cli\u003eThe all-metal carbide-toothed chuck holds round-shank bits without the slip that ruins a hole\u003c\/li\u003e\n\u003cli\u003eTwo XC5.0 packs, a charger and a case mean the drill works all day out of the box and stays protected in the truck\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016282554734,"sku":"USM2904-22","price":249.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/d84f23ff69dc487985a7470564a3abb8.webp?v=1789414832"},{"product_id":"milwaukee-m18-fuel-1-3-4-sds-max-rotary-hammer-kit-w-one-key-2718-22hd","title":"Milwaukee M18 FUEL 1-3\/4\" SDS MAX Rotary Hammer Kit w\/ONE-KEY (2718-22HD)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1-3\/4\" SDS MAX Rotary Hammer Kit w\/ ONE-KEY (2718-22HD) delivering 8.1 ft-lbs of impact energy at 2,900 BPM and 380 RPM\u003c\/li\u003e\n\u003cli\u003e1-3\/4\" SDS MAX bit capacity with two-mode operation: rotary hammer and hammer only\u003c\/li\u003e\n\u003cli\u003eVibration measured at 10 m\/s2, with AUTOSTOP kickback control for enhanced safety\u003c\/li\u003e\n\u003cli\u003eGenerates the equivalent of 15A corded power and chips up to 1\/2 ton of material per charge\u003c\/li\u003e\n\u003cli\u003eKit includes the hammer, two M18 REDLITHIUM HIGH OUTPUT HD12.0 battery packs, M18 \u0026amp; M12 rapid charger, side handle, grease tube and carrying case; ONE-KEY compatible for tool tracking and management\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8.1 ft-lbs at 2,900 BPM lets one cordless hammer cover the anchor drilling and demolition a 15A corded unit was needed for\u003c\/li\u003e\n\u003cli\u003eCutting the cord removes the generator, cord runs and GFCI trips from high-rise and remote concrete work\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP shuts the tool down on a bind-up before the body twists your wrists off the handles\u003c\/li\u003e\n\u003cli\u003e10 m\/s2 vibration keeps you inside sensible daily trigger-time limits on repetitive chipping\u003c\/li\u003e\n\u003cli\u003eTwo HD12.0 packs and a rapid charger mean chipping continues while the second pack recharges\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016283210094,"sku":"USM2718-22HD","price":1253.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/76824e0007fd43a48d30c4714c23923c.webp?v=1789414832"},{"product_id":"milwaukee-1-9-16-sds-max-rotary-hammer-5317-21","title":"Milwaukee 1-9\/16\" SDS Max Rotary Hammer (5317-21)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMilwaukee 5317-21 corded 1-9\/16\" SDS Max rotary hammer\u003c\/li\u003e\n\u003cli\u003e10.5 amp motor delivering 450 RPM and 3,000 BPM\u003c\/li\u003e\n\u003cli\u003e5.5 ft-lbs (7.5J) of impact energy\u003c\/li\u003e\n\u003cli\u003eTwo-mode operation for rotary hammer and hammer only, with a 12-position chipping adjustment\u003c\/li\u003e\n\u003cli\u003eIncludes a carrying case and side handle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5.5 ft-lbs of impact energy in a 10.5 amp corded package suits anchor holes and light chipping without a breaker\u003c\/li\u003e\n\u003cli\u003eHammer-only mode plus 12 chipping positions lets you set the chisel edge where the work needs it\u003c\/li\u003e\n\u003cli\u003eConstant Power Technology holds speed as the bit loads up in dense concrete\u003c\/li\u003e\n\u003cli\u003eMechanical clutch absorbs the shock of a bit binding on rebar, protecting the gearbox and your wrists\u003c\/li\u003e\n\u003cli\u003eCorded power means no battery management on long drilling runs, and the case keeps the tool and handle together\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016283373934,"sku":"USM5317-21","price":476.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/6f21656f49a342b680fdb1e7d591d58e.gif?v=1789414830"},{"product_id":"milwaukee-3-4-hex-demo-clay-spade-48-62-3040","title":"Milwaukee 3\/4\" HEX Demo Clay Spade (48-62-3040)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" hex demo clay spade, catalog number 48-62-3040, with a 3\/4\" hex shank\u003c\/li\u003e\n\u003cli\u003e4-1\/2\" blade width and 16-3\/4\" overall length\u003c\/li\u003e\n\u003cli\u003eForged from high grade steel\u003c\/li\u003e\n\u003cli\u003eMade for digging clay, hard packed gravel and dirt -- not for use in concrete\u003c\/li\u003e\n\u003cli\u003eSold as (1) clay spade\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe 4-1\/2\" blade moves a useful bite of soil per stroke while still fitting a narrow trench\u003c\/li\u003e\n\u003cli\u003e16-3\/4\" overall length keeps the hammer close to the work for control in a trench bottom\u003c\/li\u003e\n\u003cli\u003eForged high grade steel stands up to repeated hammer impact in packed gravel\u003c\/li\u003e\n\u003cli\u003eA 3\/4\" hex shank drops straight into demo hammers built for that shank -- no adapter\u003c\/li\u003e\n\u003cli\u003eKnowing it is a soil tool, not a concrete tool, keeps you from ruining the edge on a slab\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016287830382,"sku":"USM48-62-3040","price":40.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/f4dd13122b154aa9a1b9e6ec670f0703.gif?v=1789414836"},{"product_id":"milwaukee-1-1-8-hex-demo-20-clay-spade-48-62-4030","title":"Milwaukee 1-1\/8\" Hex Demo 20\" Clay Spade (48-62-4030)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1-1\/8\" hex demo clay spade, catalog number 48-62-4030, with a 5-1\/2\" blade width and 20\" overall length\u003c\/li\u003e\n\u003cli\u003e1-1\/8\" collared hex shank with notch\u003c\/li\u003e\n\u003cli\u003eForged from high grade steel\u003c\/li\u003e\n\u003cli\u003eDigs clay, hard packed gravel and dirt -- do not use in concrete\u003c\/li\u003e\n\u003cli\u003eSold as (1) clay spade\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe wide 5-1\/2\" blade shears out large plugs of packed soil, so a trench opens in fewer strokes\u003c\/li\u003e\n\u003cli\u003e20\" overall length lets you drive the spade from standing height into a trench bottom\u003c\/li\u003e\n\u003cli\u003eForged high grade steel survives the hammer loads that bend lighter digging blades\u003c\/li\u003e\n\u003cli\u003eA 1-1\/8\" collared hex shank fits standard demolition hammers with no adapter\u003c\/li\u003e\n\u003cli\u003eUsing a soil spade instead of a chisel on hardpan saves the chisel edge for concrete work\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016287994222,"sku":"USM48-62-4030","price":101.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/f49e72fff4414001b155996e36dfdda6.webp?v=1789414838"},{"product_id":"milwaukee-1-1-8-hex-demo-20-moil-point-48-62-4000","title":"Milwaukee 1-1\/8\" Hex Demo 20\" Moil Point (48-62-4000)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1-1\/8\" hex demo moil point, catalog number 48-62-4000, 20\" overall length\u003c\/li\u003e\n\u003cli\u003e1-1\/8\" collared hex shank with notch\u003c\/li\u003e\n\u003cli\u003eForged from high grade steel\u003c\/li\u003e\n\u003cli\u003eStarts holes in concrete slabs and handles general chipping and breaking\u003c\/li\u003e\n\u003cli\u003eSold as (1) moil point\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA concentrated point puts all the hammer energy on one spot to crack a slab and open a starting hole\u003c\/li\u003e\n\u003cli\u003e20\" of length reaches through slab thickness and keeps your hands clear of the debris\u003c\/li\u003e\n\u003cli\u003eForged high grade steel resists mushrooming under sustained breaker work\u003c\/li\u003e\n\u003cli\u003eThe collared, notched 1-1\/8\" hex shank seats in standard 1-1\/8\" demolition hammers\u003c\/li\u003e\n\u003cli\u003eOne point covers both hole starting and general demo, so fewer steels ride in the case\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016288190830,"sku":"USM48-62-4000","price":17.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/c68ca3b9c37d4afca958ebb8b3639164.webp?v=1789414838"},{"product_id":"milwaukee-1-1-8-hex-16-narrow-chisel-48-62-4006","title":"Milwaukee 1-1\/8\" Hex 16\" Narrow Chisel (48-62-4006)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1-1\/8\" hex narrow chisel, catalog number 48-62-4006, 16\" overall length with a 1-1\/8\" hex notch shank\u003c\/li\u003e\n\u003cli\u003eNarrow tip geometry for general chipping and breaking\u003c\/li\u003e\n\u003cli\u003eHigh-grade forged steel, shot-peened for improved performance\u003c\/li\u003e\n\u003cli\u003eRust prevention coating on the body\u003c\/li\u003e\n\u003cli\u003eFor use with MX FUEL and corded electric breaker hammers -- not for pneumatic or hydraulic breakers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAt 16\" it is the shorter, more controllable option when a 20\" steel is unwieldy overhead or in a corner\u003c\/li\u003e\n\u003cli\u003eThe narrow tip follows a scored line so you break only what you meant to break\u003c\/li\u003e\n\u003cli\u003eShot-peening treats the surface against the fatigue that starts breaker-steel failures\u003c\/li\u003e\n\u003cli\u003eThe rust coating matters for a steel that lives in a damp gang box between jobs\u003c\/li\u003e\n\u003cli\u003eA clear tool-compatibility limit tells you up front whether it belongs on your breaker\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016288321902,"sku":"USM48-62-4006","price":47.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/d60442418d1a485db129bb578be8b75d.webp?v=1789414840"},{"product_id":"milwaukee-1-1-8-hex-demo-15-1-2-ground-rod-driver-48-62-4045","title":"Milwaukee 1-1\/8\" Hex Demo 15-1\/2\" Ground Rod Driver (48-62-4045)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1-1\/8\" hex demo ground rod driver, catalog number 48-62-4045, 15-1\/2\" overall length\u003c\/li\u003e\n\u003cli\u003eDrives 5\/8\" and 3\/4\" ground rods, with a 3\" socket depth and a .906\" inner diameter\u003c\/li\u003e\n\u003cli\u003e1-1\/8\" collared hex shank with notch\u003c\/li\u003e\n\u003cli\u003eForged from high grade steel\u003c\/li\u003e\n\u003cli\u003eSold as (1) ground rod driver\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOne driver covers both 5\/8\" and 3\/4\" rods, the two sizes electricians actually install\u003c\/li\u003e\n\u003cli\u003eThe 3\" deep socket captures the rod head so the hammer drives it straight instead of walking off\u003c\/li\u003e\n\u003cli\u003eDriving rods with a demolition hammer beats sledging them, especially in hard or rocky ground\u003c\/li\u003e\n\u003cli\u003eForged high grade steel takes the direct end-loading a rod driver sees on every blow\u003c\/li\u003e\n\u003cli\u003eThe 1-1\/8\" collared hex shank drops into standard demo hammers already on the truck\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016288354670,"sku":"USM48-62-4045","price":64.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/67928fbf4b6b480c8c209e3453f8cd1c.webp?v=1789414836"},{"product_id":"milwaukee-1-1-8-hex-demo-20-narrow-chisel-48-62-4005","title":"Milwaukee 1-1\/8\" Hex Demo 20\" Narrow Chisel (48-62-4005)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1-1\/8\" hex demo narrow chisel, catalog number 48-62-4005, with a 20-1\/2\" overall length\u003c\/li\u003e\n\u003cli\u003e1-1\/8\" collared hex shank with notch\u003c\/li\u003e\n\u003cli\u003eForged from high grade steel\u003c\/li\u003e\n\u003cli\u003eBuilt for general chipping and breaking\u003c\/li\u003e\n\u003cli\u003eSold as (1) narrow chisel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA narrow tip concentrates impact into a line, so it tracks a break instead of skating\u003c\/li\u003e\n\u003cli\u003e20-1\/2\" of reach lets you work a slab or wall from a standing position\u003c\/li\u003e\n\u003cli\u003eForged high grade steel takes repeated breaker cycles without deforming at the tip\u003c\/li\u003e\n\u003cli\u003eThe collared notched 1-1\/8\" hex fits standard 1-1\/8\" demolition hammers directly\u003c\/li\u003e\n\u003cli\u003eChisel geometry removes material along a controlled line where a point would just punch holes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016289829230,"sku":"USM48-62-4005","price":19.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/60cfdc50cb1f439f8868d8162abb5172.webp?v=1789414836"},{"product_id":"chicago-pneumatic-handheld-hydraulic-breaker-brk-40-vr","title":"Chicago Pneumatic Handheld Hydraulic Breaker (BRK 40 VR)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChicago Pneumatic BRK 40 VR handheld hydraulic breaker, 50 lb service weight and 26 in. long\u003c\/li\u003e\n\u003cli\u003eRuns on 5 gpm oil flow at 1500 to 1800 psi working pressure, with a 145 psi maximum return line pressure\u003c\/li\u003e\n\u003cli\u003eDelivers 1400 blows per minute at 5 gpm\u003c\/li\u003e\n\u003cli\u003eAccepts 1 x 4-1\/4 in. and 1-1\/8 x 6 in. hex tool shanks\u003c\/li\u003e\n\u003cli\u003eVibration level of 5.0 m\/s2\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA 50 lb class breaker is heavy enough to break slab and asphalt but still handled by one operator\u003c\/li\u003e\n\u003cli\u003e1400 blows per minute keeps the tool moving through concrete instead of bouncing on it\u003c\/li\u003e\n\u003cli\u003eRunning on a common 5 gpm, 1500 to 1800 psi circuit means most utility hydraulic power units will drive it\u003c\/li\u003e\n\u003cli\u003eThe 5.0 m\/s2 vibration figure is published, so you can plan exposure time against your own limits\u003c\/li\u003e\n\u003cli\u003eStandard 1 in. and 1-1\/8 in. hex shanks let you use steels you likely already stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Chicago Pneumatic","offers":[{"title":"Default Title","offer_id":55016294252910,"sku":"USMBRK40VR","price":2765.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/cq5dam.web.1200.628.jpg?v=1789414844"},{"product_id":"milwaukee-mx-fuel-breaker-kit-mxf368-1xc","title":"Milwaukee MX FUEL™ Breaker Kit (MXF368-1XC)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMilwaukee MX FUEL MXF368-1XC breaker kit with a 1-1\/8\" hex chuck\u003c\/li\u003e\n\u003cli\u003ePOWERSTATE brushless motor delivering 50 ft-lbs of impact energy at 1,300 blows per minute\u003c\/li\u003e\n\u003cli\u003e63.9 lb breaker measuring 32.2\" long x 11.6\" high x 25.1\" wide, with a rated 4.9 m\/s2 vibration level\u003c\/li\u003e\n\u003cli\u003eKit includes an MX FUEL REDLITHIUM XC406 battery pack, MX FUEL charger, cart and three chisels\u003c\/li\u003e\n\u003cli\u003eAnti-vibration body with a front handle and LED lights at the chisel point\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e50 ft-lbs of impact energy with up to 70% lower vibration keeps hand-arm exposure down through a full shift\u003c\/li\u003e\n\u003cli\u003eBreaks roughly 2 tons of material per battery charge, or a 12\" x 6\" x 40 ft trench on a single charge\u003c\/li\u003e\n\u003cli\u003eLightest weight breaker in its class, so repositioning it does not take two people\u003c\/li\u003e\n\u003cli\u003eCordless operation removes the hoses, compressor and fumes a pneumatic breaker needs in occupied spaces\u003c\/li\u003e\n\u003cli\u003eBattery, charger, cart and three chisels ship together, and equipment plus battery carry a 2 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016298021230,"sku":"USMMXF368-1XC","price":2621.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/4dd6fe67f5fb4382afd281e9fa2372e5.webp?v=1789414845"},{"product_id":"milwaukee-m18-fuel-1-sds-plus-rotary-hammer-w-dust-extractor-2912-22de","title":"Milwaukee M18 FUEL 1\" SDS Plus Rotary Hammer w\/ Dust Extractor Kit (2912-22DE)","description":"\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM18 FUEL 1\" SDS Plus rotary hammer kit (2912-22DE) built on a POWERSTATE brushless motor rated 2 ft-lbs impact energy, 1,330 RPM and 4,800 BPM\u003c\/li\u003e\n\u003cli\u003eIncludes the M18 FUEL HAMMERVAC 1\" dedicated dust extractor (2912-DE), which collects holes up to 1\" in diameter and 6\" deep through a certified HEPA filter that captures 99.97% of particles larger than 0.3 microns\u003c\/li\u003e\n\u003cli\u003e3-mode selector (rotary hammer, hammer only, rotary only) with AUTOSTOP Kickback Control, AVS Anti-Vibration System and REDLINK PLUS Intelligence\u003c\/li\u003e\n\u003cli\u003eKit ships with the 2912-20 hammer, two M18 REDLITHIUM HIGH OUTPUT XC6.0 battery packs, an M18 and M12 Rapid Charger and the HAMMERVAC extractor\u003c\/li\u003e\n\u003cli\u003eOSHA Table 1 compliant, AUTOPULSE filter cleaning mechanism, up to 125 holes of 3\/8\" x 2\" per charge, 5-year tool warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrills and captures dust in a single pass, so no separate vacuum, hose routing or second worker is needed at the wall\u003c\/li\u003e\n\u003cli\u003eTable 1 compliance with the matched extractor keeps respirable silica paperwork simple when an inspector shows up\u003c\/li\u003e\n\u003cli\u003eAUTOSTOP shutdown limits the wrist and arm strain that follows a bit binding in rebar\u003c\/li\u003e\n\u003cli\u003e125 anchor holes per charge means fewer trips back to the charger during a long run of hangers\u003c\/li\u003e\n\u003cli\u003eHammer-only and rotary-only modes cover light chipping and clean bit drilling without carrying a second tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAvailability:\u003c\/strong\u003e Usually Ships in Business 2-3 Days\u003c\/p\u003e","brand":"Milwaukee Tool","offers":[{"title":"Default Title","offer_id":55016298185070,"sku":"USM2912-22DE","price":799.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/files\/e1732be6be1344de8ae6185c8840ea29.webp?v=1789414845"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0611\/1533\/4810\/collections\/2504-20.webp?v=1789596030","url":"https:\/\/www.shelving.com\/collections\/rotary-hammers-breakers.oembed","provider":"Shelving Inc. ","version":"1.0","type":"link"}