Yes. We offer professional custom post-cutting services to meet specific facility height requirements. Posts can be precision-cut to any size for an additional $5.00 per post (or a discounted rate of $14.00 per set of 4). All custom orders arrive with post caps pre-installed for a clean, industrial finish. To ensure accuracy on custom dimensions, please contact our engineering sales team at 1-866-802-1436.

Yes! All of our extra and specialty shelves and wire shelving kits come with shelf clips at no additional cost. If you need to buy shelf clips separately, you can purchase them here.

The wires on the sides are about .2" thick. The smaller horizontal wires are about .135" thick. Check out our wire shelving technical specifications for more detailed information.

You can make any size wire shelving unit with any number of shelves by purchasing the size posts you need and the number/size shelves you need (shelf clips are included). We have a Wire Shelving Parts page that has everything to build your custom unit.

Yes. Compatible casters can be added to most units, making shelving mobile for cleaning, reorganization, or workflow flexibility. Read our tips for choosing the perfect caster to help you make the right decision for your unit.

Yes, you can add as many shelves as you can fit on the posts. Just make sure you will have enough vertical space for the items you wish to store. We carry individual shelves (complete with shelf clips) that you can add to your shelving unit.

If you choose not to have a bottom shelf, we recommend that you support the posts with 3 or 4 hanger rails along the depth and width of the bottom. Installing triangle footplates and/or post wall brackets can also help to stabilize a unit without a bottom shelf.

Our Wire Shelving dimensions are outside to outside of the shelf which includes the post hole. The depth is front to back and the width is left to right.

Our Wire Shelving posts have notches every inch that allow shelves to be adjusted, so you can make the space between your shelves as short or tall as you need them to be!

Our wire shelving is manufactured to the same specifications and grade of steel as Metro, meaning they have the same weight capacity. The Super Erecta Metro line we carry has levers that allow for easy shelf adjustment. However, our SI brand has far more sizes to choose from since we stock our brand in bulk. If you put SI brand and Metro side by side you really couldn't tell the difference but our SI brand is more budget friendly because of our bulk quantities.

The black rings in the packaging keep the shelves in place during transit. They are not a part of the shelf, so you can dispose of them if you wish.

Most commercial wire shelving systems support between 500 and 800 pounds per shelf when weight is evenly distributed. Load capacity varies by shelf size and configuration.

Yes. Shelves adjust in 1-inch increments along the posts, allowing you to customize vertical spacing for different storage needs.

Here is an illustration of our posts' anatomy. Note: all posts over 54" in length come in two pieces that are held together by a connector (as shown in the picture). Smaller posts will not have this piece because they do not ship in two pieces.

No tools are required. Simply attach the post clips at the desired height, slide the shelf onto the clips, and press downward to secure it. Our products come with an easy assembly guide to help you through the process. We also have videos that demonstrate the process.

Yes. Add-on units and individual shelves allow you to expand or reconfigure your system as storage needs change.